Helping you work smarter not harder
  • Tool Recommendations
  • Tips
  • RTSAuto

Tips

Tips when working with tools.

Inexpensive alternative to evaporust

September 24, 2024 admin 1

The recipe: * Per 1L of H2O 1: 100grams Citric Acid. 2: 40grams Sodium Carbonate / 63Grams Sodium Bicarbonate / 30grams Sodium Hydroxide. After reaction […]

Super useful 3M adhesive matrix based on substrate

December 7, 2023 admin 0

Every had two different materials you were looking to bond and wondered what would be the best type of adhesive? 3M has created a substrate […]

Useful Bolt Charts (Recommended torque, Conversion charts, Head Bolt to bolt diameter, Lubricated torque)

October 4, 2020 admin 1

Bolt head/Wrench size to bolt diameter conversion chart:   Standard recommended torque spec for each size bolt:   Conversion factor based on bolt condition (reduce […]

Common Locknut comparison – Junker test

July 10, 2020 admin 0

Ever wondered what which of the common types of locking nuts or washers work the best? Well, there is a standardized test for that; the […]

How to combine two 120v plugs to create a 240v extension connector

February 11, 2020 admin 0

Getting 240v is surprisingly easy in North American homes because a 240v connection (like a stove and dryer) is just the product of two out […]

How to crimp electrical connectors properly

October 22, 2019 admin 0

The reason electrical crimpers provide an option to crimp insulated and non-insulated connectors is not necessarily because the actual part being crimped is different, it […]

Lifetime warranty, how about lifetime improvement? A tool company that can trace back any problems to raw materials

July 8, 2019 admin 0

Many tool companies, especially larger established companies offer lifetime warranties against defects or failures of their tools. However, with producing many thousands to tens of […]

Which hand tool brand is best? Scientific tests and graphs

July 8, 2019 admin 0

Well, only you can make the decision of what constitutes “best”. However, below are scientific tests from multiple magazines showing destruction testing and strength limits […]

Deciphering air fittings and coupler standards

May 3, 2019 admin 3

When you delve into looking into air fittings and different standards, sometimes it feels like you need a Phd to understand everything. Lets decipher it […]

Static air pressure vs working air pressure: What should you set your air compressor to for an air impact wrench?

April 30, 2019 admin 0

Most impact wrenches are labeled or indicated as operating a recommended 90 psi: What they don’t tell you, is that the air pressure they are […]

Posts navigation

1 2 »

Recent Posts

  • Inexpensive alternative to evaporust
  • Super useful 3M adhesive matrix based on substrate
  • Professional grade smoke machine that is half the price of competitors
  • A properly good 120/240v welder thats $399
  • Mess Free Anti Seize, thread locker and sealant stick

Recent Comments

  • Huet Landry on JIS vs Phillips screwdrivers and Where to buy a JIS screwdriver.
  • chris vandervelden on Inexpensive alternative to evaporust
  • Layne S on JIS vs Phillips screwdrivers and Where to buy a JIS screwdriver.
  • bill sawyer on JIS vs Phillips screwdrivers and Where to buy a JIS screwdriver.
  • Ronald T Biglen on JIS vs Phillips screwdrivers and Where to buy a JIS screwdriver.

Admin@rtstools.com

Copyright © 2025 | WordPress Theme by MH Themes

Consider adding us to your whitelist in your ad blocker. Many of our articles have product recommendations that get removed by adblockers! We don't do pop ups or intrusive ads.